Engineering Educational Solution

MX-64AT

รูปภาพเพิ่มเติม

MX-64AT
รหัสสินค้า : 902-0098-000
฿13,910.00
(รวมภาษีมูลค่าเพิ่มแล้ว)
MX-64AT
 
ส่งสินค้าภายใน 2 สัปดาห์หลังจากชำระเงิน


หรือ

รายละเอียด

Features

DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in

one DC servo module.

 

MX-series is a new concept of DYNAMIXEL with advanced functions, such as precise control, PID control, 360 degree of position

control, and high speed communication.

 

Advanced durability, degree of precision, and wider control zone were achieved thanks to the newly applied CONTACTLESS ABSOLUTE ENCODER

360 degrees POSITION CONTROL without dead zone

4,096 PRECISE RESOLUTION by 0.088 degrees

SPEED CONTROL at ENDLESS TURN MODE 

Reliability and accuracy were advanced in the position control through PID CONTROL 

High baud rate up to 4.5Mbps

Torque control via current sensing

Package Components
MX-64AT 1
HN05-N102 1
Thrust Washer (for horn) 1
3P Cable 200mm 1
Wrench Bolt WB M2.5x4 16
Wrench Bolt WB M3x8 1
Nut M2.5 18
 
Compatible Products

Controller : CM-5, CM-510, CM530, CM-700, OpenCM9.04(+ OpenCM485 Expansion Board), OpenCR

Interface : USB2Dynamixel, U2D2

 
*NOT compatible with the HN05-N101 Set / T101 Set.
 
Factory Default Settings

ID : 1

Baud Rate : 57600bps

(User can change various settings including ID and baud rate according to environment)

Specification
Model Name MX-64AT
MCU Cortex-M3 (72 [Mhz], 32 [bit])
Input VoltageMin. [V] 10.0
Recommended [V] 12.0
Max. [V] 14.8
Performance CharacteristicsVoltage [V] 12.0
Stall Torque [N·m] 6.00
Stall Current [A] 4.1
No Load Speed [rpm] 63.0
No Load Current [A] 0.15
Continuous OperationVoltage [V] -
Torque [N·m] -
Speed [rpm] -
Current [A] -
ResolutionResolution [deg/pulse] 0.0879
Step [pulse] 4,096
Angle [degree] 360
Position Sensor Contactless absolute encoder (12 [bit], 360 [deg])
Maker : ams(www.ams.com), Part No : AS5045
Operating TemperatureMin. [°C] -5
Max. [°C] 80
Motor Coreless (Maxon)
Baud RateMin. [bps] 8,000
Max. [bps] 4,500,000
Control Algorithm PID
Gear Type Spur
Gear Material Precious Metal
Case Material Precious Metal(Front)
Engineering Plastic(Middle, Back)
Dimensions (WⅹHⅹD) [mm] 40.2 X 61.1 X 41
Dimensions (WⅹHⅹD) [inch] 1.58 X 2.41 X 1.61
Weight [g] 135.00
Weight [oz] 4.76
Gear Ratio 200 : 1
Command Signal Digital Packet
Protocol Type Half duplex Asynchronous Serial Communication (8bit, 1stop, No Parity)
Link (Physical) TTL Level Multi Drop Bus
ID 0 ~ 253
Feedback Position, Temperature, Load, Input Voltage, etc
Protocol version 1.0(Default)
2.0
Operating Mode / Angle Wheel Mode:Endless turn
Joint Mode:360 [deg]
Multi-turn Mode:±28 [rev]
Output [W] -
Standby Current [mA] 100
 

ข้อมูลส่วนตัว

กรุณาระบุหัวข้อในการติดต่อ

* ฟิลด์ที่จำเป็น

Powered by WebForms

Tags สินค้า

ใช่ช่องว่างแบ่ง tag. ใช้ single quotes (') สำหรับคำพูด.